Stripping & Refinishing

Strip & Refinishing
of Commercial Flooring

Call today to set up an estimate!
Proudly using Betco & Zep products.

References available from local businesses, churches, & government buildings.

STRIP & REFINISH PROCESS:
1. SWEEP ALL DEBRIS FROM FLOOR
2. MOP ON STRIPPING SOLUTION
3. AFTER DWELLING TIME, SCRUB WITH MACHINE
4. ADD NEUTRALIZER BY MOP
5. SCRUB WITH MACHINE AGAIN
6. WET VAC ALL ACCESS LIQUID AND REMOVE WAX & DEBRIS
7. MOP FLOOR CLEAN WITH CLEAR FRESH WATER
8. ALLOW FLOORING TO FULLY DRY
9. START APPLYING THIN COATS OF FINISHER WITH BUILT IN SEALER (4-6 COATS MIN.)
10. AFTER LAST COAT ALLOW TO FULLY DRY & CURE FOR 24 HOURS BEFORE FOOT TRAFFIC,
72 HOURS FOR HEAVIER TRAFFIC.
11. MAINTAIN FLOORS WITH DILUTED NEUTALIZED CLEANER BY ZEP ON A REGULAR BASIS.
12. CONSIDER A RETOUCH OF FINISHER, INSTEAD OF A FULL STRIP IF THERE’S LIFE IN THE FLOOR AND IT NEEDS A SIMPLE SPRUCING UP. WE CAN DO A LIGHT SCRUB, AND THEN APPLY 2-4 THIN COATS OF FINISH.

The fine print:
A $35 fee will be assessed for a returned check. A $10-20 fee will be added for same day/weekend services. Payment is due at time of service however other arrangements can be made but all residential & commercial payments must be made within 30 days of the service. There will be a $50 Fee for every 30 days the invoice goes unpaid.

If you have any issues with The cleaning please contact us within a week of the invoice date to avoid additional charges for a return visit.

For Duct Cleaning customers understand any damage done to the vent covers to perform the cleaning will be the responsibility of the home owner. We do everything in our power to avoid or remedy paint scratches, dents, etc that come up, however some are unavoidable. If access hOles are needed permission from the owner will be needed to proceed. Thank you for your understanding.

Strip & Refinishing​of Commercial Flooring

Strip & Refinishing
of Commercial Flooring